STL · OBJ · 3MF · max 120 MB. The file is analysed in your browser.
Scale (%)%
If the model came in wrong units: ·
Size-
Volume-
Model weight-
Print time-
Supports-
Overhang-
⚙️ Material & settings
1 Material and colour
2 Quality and settings
💪 Must the part withstand force / load?
✨ Must the exterior be ultra-detailed? ?We print with a very fine layer height (0.12 mm instead of standard 0.20 mm). This brings out fine details and smoother shallow curves, but significantly increases print time (and price) and can slightly reduce mechanical strength. 💡 Tip: On standard straight and functional parts the difference is barely visible to the naked eye – standard layers are usually best (choose No).
🪄 Must supported surfaces look as clean as the rest of the part? ?When part of the model overhangs in the air (angle > 45°, red areas in 3D view), temporary supports must be printed underneath. Choosing "No" (standard supports): a tiny air gap (~0.2–0.3 mm depending on nozzle) is left so supports can break away, leaving the supported surface slightly rougher with ~0.2–0.3 mm dimensional variance. Choosing "Yes" (dedicated support interface): we print the contact layer with a 2-nozzle printer using a separate release material at 0 mm gap, keeping the supported surface smooth, strong and accurate (slower & higher cost). 💡 Tip: If the supported side is hidden and ~0.3 mm variance does not matter, choose No – it is much more affordable.
☀️ Will it be used outdoors, in a car or warm area?
🧪 Choose usage class and filament:
Click a usage class and select a filament below – see heat resistance and best use cases, and the price updates instantly.
⚠️ Please answer all 4 Yes/No questions and choose a material so we can configure your part properly.
Where and in what direction do forces, bending or tension act? (e.g. "bolt pulls from this hole", "clip bends outward" – we orient the layers for maximum strength)
Where is the part used and which surface must look the cleanest?
✓ We will orient the part on the build plate and configure print settings based on your answers.
⚙️ Advanced settings
3 Supports
✨ Logo on Part (SVG)
Upload an .SVG file and click on the model surface where you want to place the logo.
✋ ✋ Drag the logo across the surface to reposition it
Logo size35 mm
Height / Depth0.80 mm (4 layers)
⚓ Anchoring depth into part3.0 mm
Rotation on surface0°
Pipe diameter (Ø)
50 mm
4 Quantity and notes
Price / pc
-
Total
-
Price includes VAT, shipping is added at checkout. Standard dimensional accuracy ±0.2 mm. The price is an estimate - if the model turns out to be more complex we will let you know before printing.
STL, OBJ or 3MF. The file is analysed in your browser - size, volume and overhanging surfaces.
2. Choose material and settings
Material, layer height, walls, infill and supports. The price updates instantly.
3. Add to cart
The file is added instantly to your cart and uploaded when you confirm your order at checkout.
Iterate Hardware Faster from Concept to Pre-Production
Built for mechanical engineers, industrial designers, and electronics R&D teams across Europe
⚡ Zero-Friction Browser Quoting
Test different wall thicknesses, layer heights (0.12 mm – 0.28 mm), and materials in real time to balance budget and mechanical performance.
🔄 Form Prototypes to Engineering Validation (EVT/DVT)
Start with PLA or matte PLA-CF for ergonomic and form studies, then switch to PETG, ABS-GF, PC, PA6-GF, or PPA-CF for functional stress testing.
✨ Dual-Nozzle Zero-Gap Support Interface (Z=0 mm)
Injection-moulded part designs often have complex overhangs and pockets. Our Z=0 mm breakaway support interface keeps supported surfaces crisp and dimensionally true.
Frequently asked questions
Which material is best for initial form and fit-check prototypes?
PLA, PLA Matte, and carbon-filled PLA-CF offer the fastest turnaround, lowest cost, and razor-sharp dimensional accuracy (±0.2 mm).
Which material mimics injection-moulded ABS or glass-filled nylon?
Use ABS-GF for rigid housings (99 °C), PETG for snap-fit closures, and PA6-GF / PA6-CF / PPA-CF to simulate glass- or carbon-filled engineering nylons.
Do you offer priority Rush Production for tight R&D deadlines?
Yes! Tick the "🚀 Rush order" checkbox in Step 4 to jump to the front of our printer queue.
Do you support EU B2B VAT reverse-charge invoicing?
Yes. At checkout, non-Estonian EU companies with a valid VIES VAT number automatically receive 0% intra-community VAT invoicing.
Are uploaded CAD files kept confidential?
Yes. Initial analysis happens locally in your browser, and uploaded production files are stored in a protected directory accessible only to our production team.